5 tons Commercial Plate Ice Machine for Fishing and Cooling

Brand: Robin

Product origin: Shandong China

Delivery time: 20 working days

Supply capacity: 100sets/Month


Robin plate ice maker masters two unique technologies: flat-plate heat exchange technology & circulating heat gas for ice dropping technology. The new-type ice making machine made via unique ice making technology and special ice dropping has solved the limitation of traditional ice making machine by frozen drum, and reaches the international leading level.


Contact Now E-Mail Telephone WhatsApp
Product Details

Product Information

The design and working principle of the ice making machine make it an efficient ice making device. Its main components include an ice cylinder, ice skates, water supply system, transmission system, and refrigeration system. During the ice making process, low-temperature refrigerant liquid enters the cylinder interlayer through the hollow shaft at the end of the cylinder, evaporates and absorbs heat to form steam, which is then compressed and condensed through the outer interlayer of the hollow shaft before being recycled for use. This design enables the plate ice machine to quickly and effectively convert water into ice, meeting various application needs. ‌

5 ton plate ice machine


Techinical Parameter

Capacity

5 Ton/24hours

Refrigerant

R22/R404A/R507/R449

Compressor Brand

Copeland/Bitzer/Refcomp

Cooling Way

Water/Air Cooling

Compressor Power

28 HP

Ice Cutter Motor

1.5 KW

Power of Circulating Water Pump

0.75 KW

Power of Water Cooling Pump

2.2 KW

Cooling Tower Motor

0.75 KW

Cooling Fan Motor

2.7 KW

Machinery Unit Size(L*W*H)

2250mm*2000mm*1950mm

Input Water Temp

21degrees Celsius

Evaporating Temp

25degrees Celsius

Condensing Temp

40degrees Celsius

Supply power

380V/50Hz(60Hz)/3P; 220V(230V)/50Hz/1P; 220V/60Hz/3P(1P); 415V/50Hz/3P; 440V/60Hz/3P.

The above data is subjected to the final design without notice.


Ice Making Principle

Structural diagram of plate ice machine

When the refrigeration system begins operating normally, the water in the tank below is transported from the cold water tank to the cold water sprinkler by the cold water pump. It is then evenly sprinkled on the surface of the evaporator. Through the cycle working of the refrigerant, some water is created into plate ice, while the water which does not become ice returns to the cold water tank below and waits for the next water cycle. After a period of time the water cycle and refrigeration stops and the water and overheating refrigerants gas begin a heat exchange with the plate ice at the same time. The plate ice then loses adhesive force and the ice drops into the ice crushing gadget due to gravity. After the ice is off the water temperature becomes low and it returns into the water sink waiting the next cycle.



Detailed Drawings of the Plate Ice Machine

display screen

Easy operation and stable performance


The use of PLC control system is simple and safe to operate, with stable ice making capacity. Only the ice production quantity needs to be selected, and other ice making processes will be automatically completed under the control of the PLC system. To ensure stability and accuracy, PLC adopts technologies such as clock synchronization, error detection, and verification. In addition, the hardware and software design of PLC considers high reliability, enabling it to adapt to complex industrial environments and exhibit robust and durable characteristics. The main feature of PLC is the use of modular structure. This design approach allows various components of the PLC, such as the CPU, power supply, and I/O, to be independently designed and replaced.

Efficient ice doffing mode


Our plate ice machine adopts hot fluorine de icing technology, which de icing is very fast. No additional energy support is required. The reverse hot Freon gas generated by the plate ice machine itself is sent to the evaporator, so no additional heat energy needs to be introduced. Therefore, the entire de icing process takes less than 120 seconds. So our machines have stable production and produce high-quality ice.

ice plate

plate ice

Meet the HACCP and FDA certification standard


This machine is made of 304 stainless steel, therefore it has anti-corrosion properties and a long service life. The advantages of stainless steel material in terms of quality mainly include corrosion resistance, high strength, high temperature resistance, hygiene, aesthetics, environmental friendliness, and wear resistance. It has been widely applied in multiple fields, demonstrating its advantages as a high-quality material.

Ban Bing is hygienic, clean, and harmless to the human body. This machine fully complies with the requirements of HACCP and FDA certification.



Plate Ice Application

Plate ice is widely used for fisheries production, aquatic products processing, supermarket fresh-keeping, food process, medicine, chemical and dye, fermentation engineering, construction project concrete cooling, mine cooling, ice storage project and papermaking industry.


1. Ice storage system: The plate-shaped ice cubes produced by the plate ice machine are used in the ice storage system as refrigerant storage. During low peak periods, the ice storage system absorbs cooling capacity and cools water or air for use in the cooling system. This application method not only improves the energy efficiency of the system, reduces power load, but also provides stable cooling effect during peak hours, reducing energy consumption and operating costs. ‌

2. Concrete mixing plant: In concrete mixing plants, plate-shaped ice cubes are widely used to control the temperature of concrete. Adding it to the concrete mixing process can effectively reduce the temperature of the concrete, control it within an appropriate range, help improve the quality of the concrete, avoid cracking and deformation, and ensure the stability and strength of the concrete structure. ‌

3. Chemical plants: Some production processes in chemical plants require temperature control to ensure product quality and smooth reactions. Plate shaped ice cubes are used as cooling media to control chemical reactions by reducing the temperature of the reaction system. Contacting the plate-shaped ice cubes with the reaction system can quickly absorb heat and lower the temperature, thereby improving the quality of the product, as well as increasing the reaction rate and production capacity. ‌

4. Coal mine cooling: Coal mining enterprises use flake ice machines for mine cooling. Compared with traditional ventilation methods, flake ice produced by flake ice machines has better cooling effects during the cooling process. ‌

5. Food preservation: Plate ice is thicker than sheet ice and can be stored for a longer time. Commonly used for food preservation of fish and meat. Moreover, the transparency of shaved ice is higher than that of sliced ice, and the shading effect on ingredients is not obvious, making it easier to highlight the appearance of the product.



plate ice application 5


Leave your messages

Related Products

Popular products

x

Submitted successfully

We will contact you as soon as possible

Close