< >

1 Ton/day Commercial Tube Ice Machine

All equipment except cooling tower is installed in steel frame.
Meet the requirements of container transportation, easy to transport, move and install.
Easy to use;The site can be put into operation only by providing water source and power source.
The standard power supply of the small tube ice machine is 380V/3P/50Hz. The power supply can be changed according to the actual situation, but it must be indicated when ordering.

Contact Now E-Mail Telephone WhatsApp

Product Details

The ice tube looks like hollow cylinder.which has external diameter 20mm, 28mm, 34mm,40mm.Length ranging from 25-50mm, and the inner hole diameter can be adjusted according to ice-making time.

Commercial Tube Ice Machine

Daily capacity: 1ton/24hours.

Ice length: 30mm, 35mm, 40mm, 45mm, 50mm.

Ice diameter: 20mm, 28mm, 34mm, 40mm.

1 ton tube ice machine features:

1. Harvest ice way: Hot gas defrosts

2. Ice tube Size: 20mm, 28mm, 34mm or 40mm in diameter; 30mm,35mm, 40mm, 45mm, 50mm in length; hollow and transparent ice.

3. Evaporator: seamless steel pipes

4. PLC program Logic Controller, which allows multiple functions such as automatic machine start and shut down; ice falling automatically when the freezing time is ensured, Automatic water making up.

5. Rotating Driver Ice Cutter: stainless steel 304 Ice Cutter Blade run by medium speed gear motor.

6. Install according to the operation manual and CD, Supply failure alarming system, and no requirement of skilled workers, high durability, and minimum maintenance.

7. Special ice outlet. Ice discharging automatically, No need taking ice by hand which can guarantee the ice clean and sanitary, meanwhile, it is matched with ice packing system to package the ice by plastic bags.

Technical parameters of All the Robin Tube ice machine

Model	Daily output (T/ 24 h)	Compressor Power	Fan Power for Cooling Tower	Cooling Pump Power	Unit Size (LWH mm) (Integrated Type)		Unit N.W. (kg)
RBT-1T	1	4.1 kw	0.25 kw	1.1 kw	11009001780		900
RBT-2T	2	7.44 kw	0.25 kw	1.5 kw	125010001950		1200
RBT-3T	3	10 kw	0.55 kw	1.5 kw	130011002200		1500
RBT-5T	5	19.9 kw`	0.55 kw	2.2 kw	160014002250		1800
Model	Daily output (T/24 h)	Compressor Power	Fan Power for Cooling Tower	Cooling Pump Power	Unit size (LWH mm) （Split type）		Unit N.W. (kg)
Model	Daily output (T/24 h)	Compressor Power	Fan Power for Cooling Tower	Cooling Pump Power	Main Host	Brine Tank	Unit N.W. (kg)
RBT-10T	10	27.9 kw	1.5 kw	4 kw	190016001850	120012003390	3500
RBT-12T	10	39.8 kw	1.5 kw	4 kw	240017002000	120012003390	3700
RBT-15T	15	46.4 kw	1.5 kw	5 kw	270020002200	150012004250	4250
RBT-20T	20	55.7 kw	2.2 kw	7.5 kw	280022002500	150012004700	6500
RBT-30T	30	83.6 kw	2.2 kw	7.5 kw	310022002500	180015005700	7200
RBT -40T	40	111.4 kw	2.2 kw	11 kw	390022502500	200015006800	8300
RBT-50T	50	139.3 kw	3.75 kw	15 kw	450022502500	220018007200	9500
1. Compressor brand: Bitzer /Franscold ; Refrigerant: R 22/ R 404 A; Cooling Method: water cooling / air cooling.2.Power supply: voltage 380V/3P/50Hz(for non-standard voltage, unit configuration needs to be calculated separately ). 3.Operating conditions: T (water supply):20℃ , T (ambient): 32℃, T(condensing):40℃, T (evaporating):-12℃. 4.(Note: The actual ice production varies due to the influence of water supply temperature and ambient temperature.) 5.(The final interpretation of the above mentioned parameters is in Icesource, there will be no further notice, if there any technical change. )

Ice tube Size as option

Tube ice outer diameter is 16mm,22mm, 28mm, 34mm, 40mm; The inner diameter can be adjusted according to the ice making time. Usually it's between 5~10mm.

Ice tube Size as option

External Diameter	Standard Length	Freezing time
16mm	25mm	14 minutes
20mm	30mm	16 minutes
28mm	35mm	18 minutes
34mm	45mm	20 minutes
40mm	55mm	25 minutes

Details

	German Bitzer compressor Bitzer compressor: high efficiency, low loss, low noise, long service life.
Touch Screen Controller Touch screen controls the whole system it is easy to use. And the friendly display mode allows you to monitor the ice machine in a better way.
	Evaporation barrel: material using SUS304.PE, aluminum alloy and other materials processing, the use of large rounded corner over set.So that there is no dead Angle of cleaning inside the equipment.
High and low pressure controller Use Denmark Danfoss for this pressure control to keep the pressure control preciously.
	Evaporator: SS 304 inside, PU insulation and also the SS 304 cladding outside to keep the top quality and long life spans.

Application

1 Human consumption ice plant
2 Port ice plant
3 Freezing drinks, mix wines, cool foodstuffs, make ice pastries and keep fresh etc.
4 Widely used in hotel, coffee shop, bar, KTV, restaurant, catering, supermarket, ballroom, etc
5 Aquatic products and food fresh preservation
6 Logistic fresh preservation
7 Chemical industry and concrete projects

ROBIN Application

About Us

Jinan robin machinery Co., Ltd, as the leading manufacturer and exporter of commercial and industrial ice making machines in China, with a decade of professional experience in ice machine making field Robin products lineup include high quality tube ice machine, aluminum direct system block ice machine, brine system ice block machine, flake ice machine, plate ice machine, cube ice machine, water chiller, cold room units and other associated equipments, such as rake type automatic ice storage, screw type automatic ice storage, pneumatic ice delivery system, screw ice delivery system, ice crusher, ice weighing system, ice packaging machine and more. We don't just make ice machines. We also help customer design ice cooling solutions. The main feature of Robin product is tailored specifically to the demands of the customer. Above all else, this includes energy efficient, longevity and hassle-free.

ROBIN team

Certification

ROBIN certificate

FQA

1.What Are Your Advantages?

We ensures our products can reach the strict quality standards and the goods can be delivered on time. We provide warmly and friendly service and after-sale service. We will reply you within 24 hours. We guarantee the best price and multiple choices.

2.When Can I Get The Price?

Usually within 24 hours after we get your inquiry. And if you are very urgent, you can call us or tell us by e-mail so we will prioritize your inquiry.

3.What Can You Do For Us?

All material/color/size are available, also we can customize products as your requirements. Any questions, pls don’t hesitate to contact us!

4.How To Confirm The Quality Before Placing The Order?

You are warmly welcomed to visit our factory and check the quality.

Leave your messages