water treatments ro 2000l-manufacture,factory,supplier from China

(Total 24 Products for water treatments ro 2000l)
Reverse osmosis (RO) is a kind of membrane separation process driven by pressure gradient. It can effectively remove dissolved salt colloids and organic matters in water like molecular filter. The reverse osmosis process is the reverse process of natural osmosis.
  Contact Now
The principle of RO water treatment machinery is that raw water passes through reverse osmosis system under high pressure, and the solvent in water diffuses from low concentration to high concentration to achieve the purpose of separation, purification and concentration. Reverse osmosis water treatment system can remove bacteria, viruses, colloid, organic matter and more than 99% soluble salts in water. The equipment has the characteristics of low operation cost, simple operation, high automation degree and stable effluent quality.
  Contact Now
The reverse osmosis equipment adopts the reverse osmosis infiltration filtration process, which is amodern and new type of pure water treatment technology.
  Contact Now
Reverse osmosis water treatment equipment is usually composed of three parts: raw water pretreatment system, reverse osmosis purification system and ultra-purification post-treatment system.
  Contact Now
Products DescriptionThe Advanced Screw Chiller Machine for Precise Temperature Control is a state-of-the-art cooling system designed to provide exceptional temperature control accuracy for various industrial applications.
  Contact Now
 Industrial Open type Water Chiller1. Screw machine chiller characteristics(1) The water-cooled screw machine is generally an open upper and lower structure of the chiller. Simple structure, less moving parts, convenient installation and debugging, reliable operation, low cost;(2) the single machine has large cooling capacity and high volumetric efficiency;(3) the cooling capacity can be stepless adjustment.2. Control systeThe controller of  screw chiller, all electrical parts adopt Schneider brand.
  Contact Now
Techinical ParameterCapacity3 Ton/24hoursRefrigerantR22/R404A/R507/R449Compressor BrandCopeland/Bitzer/RefcompCooling WayWater/Air CoolingCompressor Power14/12 HPIce Cutter Motor1.5 KWPower of Circulating Water Pump0.37 KWPower of Water Cooling Pump1.5 KWCooling Tower Motor0.55 KWCooling Fan Motor1.7 KWMachinery Unit Size(L*W*H)2100mm*1650mm*2110mmInput Water Temp21degrees CelsiusEvaporating Temp25degrees CelsiusCondensing Temp40degrees CelsiusSupply power380V/50Hz(60Hz)/3P; 220V(230V)/50Hz/1P; 220V/60Hz/3P(1P); 415V/50Hz/3P; 440V/60Hz/3P.The above data is subjected to the final design without
  Contact Now
Products IntroductionRobin marine seawater flake ice machine use sea water to make ice. The biggest difference between fresh water flake ice machines is the design of the material and the compressor of the ice making machine. As the inlet of marine seawater flake ice machine is sea water, in order to overcome the corrosion of seawater, marine seawater flake ice machine adopts special pipe material.
  Contact Now
The main reason for the good quality of the ice machine produced by our company is that the compressor, condenser, expansion valve, PLC controller and other important parts are imported. The equipment has good performance and strong anti-interference ability. The external environment has an impact on the output and ice.
  Contact Now
Our 2 ton tube ice machine is both used in customer consuming and cooling systems, and it's also widely used in restaurants, fast-food stores, supermarkets, healthcare centers, schools, Night clubs & bars, meat plants etc. This tube ice machine is environmentally safe, using Freon refrigerant. All surfaces that contact with water are stainless steel. Tube ice is tasteless, sanitary, transparent, fully meets with the food standard.
  Contact Now
Robin tube ice machine is a type ice machine, which produces cylinder shape ice with a hole in the middle; it adopts flooded evaporator model, which improves ice making efficiency and capacity. Meanwhile, compact structure design can save installation space. Ice thickness and hollow part size can be adjusted according to customer requirements.
  Contact Now
Products IntroductionJinan Robin Machine Co., Ltd. has the latest masterpiece - 2-ton high-efficiency seawater flake ice machine. This machine is equipped with the industry's top high-performance compressor, and selected materials and precision components, through the ingenious design, tailor-made for marine vessels in the harsh marine environment.
  Contact Now
Products Description1.Equipped with international brand hermetic scroll compressor, low noise, high efficiency, long life, and low failure rate.2.Evaporator and condenser made of high efficiency red cooper (anti-corrosion material can also be used), high heat transferring efficiency;3.Throttle valve and expansion valves are world famous brand, to maximize the cooling ability and ensure high stability;4.Equipped with imported pumps, good stability of equilibrium, watertight, ensure stable and sustainable flow of chilled water;5.Equipped with a stainless steel water tank6.Equipped with a full-fe
  Contact Now
The evaporator is a vertical drum structure, composed of ice - making main components, ice cutter, main shaft, water separator, baffle plate. They rotate slowly counterclockwise with the help of the speed reducer. Water enters the water separator from the inlet of the ice-making machine evaporator, and is evenly sprinkled on the inner wall of the evaporator through the sprinkling pipe to form a water film.
  Contact Now
Features:1. Waterproof structure, double front door design, made of thick steel plate, outdoor powder spraying surface is luxurious and beautiful, easy to maintain and install.2. Parts in contact with ice and water are made of food-grade 304 stainless steel.Advanced and stable vending technology, one control panel controls the sales of water and ice.3.
  Contact Now
Product DescriptionSlurry ice is a unique chilling medium and is formed out of seawater of a mixture of fresh water and salt.
  Contact Now
Features:1. Efficient and stable packaging technology, automatic bagging, bagging, ice filling and bag sealing. No manual intervention is required.2. Sell loose ice or bagged ice to meet different needs.3. Automatic ice making, stop selling when ice is full, ice is exhausted, water is exhausted, bag is exhausted, etc. Use GSM system to report machine status.4. Advanced reverse osmosis purification technology, nine-layer water filtration.
  Contact Now
Sea water type flake ice machine is always used on marine fishing, or use on sea side land. It can use fresh water or sea water cooling. It adopts high quality SS 316 to avoid corrosion. During ocean shipping, can make ice by seawater directly.
  Contact Now
RBC-2T whose capacity is 2 tons cube ice per day, adopts with water cooling system. That's to say, there are two parts of it.One is the compressor unit and ice making system.The other is cooling tower. You just need to connect the water pipes, water pump and power wires. Our machine is controlled by a PLC system.
  Contact Now
Working Condition:1. Standard ambient temperature: 25ºC2. Standard water inlet temperature: 20ºC3. Evaporating temperature: -20ºC4. Condensing temperature: 40ºC (air cooled) / 38ºC (water cooled)5. Power supply: 3P/380V/50Hz6. Flake ice thickness: 1.6-2.3mm7.
  Contact Now
3 ton tube ice machine is equipped with various protection design such as compressor high pressure, compressor low pressure and compressor oil pressure, low water level, water flow, full ice, etc. It makes the machine run smoothly in over 30000 hours.Tube ice is transparent and sanitary, not easy to melt. Its inner and outer diameter can be adjusted for your requirements.
  Contact Now
900KG Ice Maker Cube Machine makes ice cubes by spraying water onto refrigerated cups, freezing the water layer by layer until the cube has reached the required size. Then the cups heat up slightly, allowing the cubes to detach and fall into the storage bin below. New water is drawn in and the process begins again.
  Contact Now
10 ton Sea water type flake ice machine is always used on marine fishing, or use on sea side land. It can use fresh water or sea water cooling. It adopts high quality SS 316 to avoid corrosion. During ocean shipping, can make ice by seawater directly.
  Contact Now
Robin large cube ice machine whose capacity is 1tons cube ice per day, adopts with water/air cooling system. That's to say, there are two parts of it. One is the compressor unit and ice making system. The other is cooling tower. You just need to connect the water pipes, water pump and power wires.Our machine is controlled by a PLC system.
  Contact Now
Relate News
Mali customers of ROBIN visited the factoryThe following is a customer from Mali visiting the ROBIN ice machine factory. The customer purchased salt water brick ice machine and quality brick ice machine from ROBIN ice machine company. The voltage is 380v, 50hz. The condensation method is classified cooling. At present, the machine has been completed. The customer came to visit the factory and was very satisfied after the visit. 
Here is a one tonne cube ice machine that ROBIN Ice Machines has built for a customer in Georgia. The size of the ice is 22*22*22mm, the machine has arrived at the customer's place, the customer put it into use and is very satisfied with it.The following are the advantages of ROBIN's commercial cube ice machine.Easy to use: the pellet ice machine is easy to operate, only need to access the water source and power supply, you can automatically make ice.
This is Jinan Robin Machinery Co., Ltd. completed the manufacture of small flake ice machine, production capacity of 1 tons / 24 hours, the material is all stainless steel, the use of air-cooled, no problems in the trial process, the operation is normal! Diversion disk diversion of water flow is smooth, the thickness of the flake ice is uniform, 1.6-2.3MM flake, strong stability, ice survival time is longer, generally placed in a small cold storage to save convenient access.
The 1-ton cube ice machine customized for Peruvian customers is being tested  The 1-ton cube ice machine customized for Peruvian customers was completed and tested successfully. The customer was very satisfied and prepared to ship it. The customer used three-phase voltage, Copeland compressor, Siemens PLC program controller, water cooling, and LS electrical components.  The cube ice machine is an efficient, energy-saving and hygienic ice-making equipment.
1 ton seawater flake ice machine completed and shipped  The 1-ton seawater flake ice machine customized for a Spanish customer has been manufactured and shipped. A Spanish customer customized a seawater flake ice machine from us, using a Bitzer compressor and water cooling. Stainless steel 316 and R449 refrigerant were selected.  The seawater flake ice machine with a daily ice output of 1 ton will be used by customers on fishing boats. It is made of SUS316 high-strength and seawater corrosion-resistant material.
Robin Ice Machine Company has completed the production of three 5-ton flake ice machines for Samoan customers.Robin Ice Machine Company has completed the production of three 5-ton flake ice machines for Samoa customers. They use 380v, 50hz, bitzer compressors. The customer is very satisfied.  1. Convenience: Flake ice maker has a very convenient way to use, you just need to pour water into the ice maker and then control the switch to the desired temperature to start making ice chips.
The flake ice machine evaporator produced by Robin Ice Machine for a customer in Mozambique has been completedThe flake ice machine evaporator produced by Robin Ice Machine for a customer in Mozambique has been completed and is ready for shipment. The customer is very satisfied  1. Convenience: Flake ice maker has a very convenient way to use, you just need to pour water into the ice maker and then control the switch to the desired temperature to start making ice chips.
Customized 1 ton cube ice machine for Peruvian customers  Peruvian customer ordered a 1-ton cube ice machine from our company and we shipped it to the customer. The customer used 220V60HZ3P voltage, Copeland compressor, and water cooling. After sending the test video to the customer, the customer was very satisfied with our machine, and we will transport the machine to the port for the customer.  This 1-ton cube ice machine is a high-efficiency appliance designed to produce a steady supply of granular ice.
1 ton flake ice machine evaporator is completed   The 1-ton flake ice machine evaporator customized for Mozambique customers has been completed. The customer customized two 1-ton flake ice machine evaporators in our factory, using 380V50hz3p voltage. And equipped with an electric control box (to control the evaporator water pump and sensor). The customer chose chrome-plated carbon steel for the inner tank and SS304 for the outer shell.   The evaporator of the flake ice machine is the core component of the flake ice machine.
Robin completed the production of three 5-ton flake ice machines for a Samoan companyThe following are three 5-ton flake ice machines made by Robin Ice Machine Company for Samoa customers. They use 380v and 50hz. They have been made and are ready for shipment.  1. Convenience: Flake ice maker has a very convenient way to use, you just need to pour water into the ice maker and then control the switch to the desired temperature to start making ice chips. In addition, the flake ice maker allows you to make cool ice flakes easily without having to worry about the waiting time.  2.