ro drinking pure water treatment machine-manufacture,factory,supplier from China

The reverse osmosis equipment adopts the reverse osmosis infiltration filtration process, which is amodern and new type of pure water treatment technology.

Reverse osmosis (RO) is a kind of membrane separation process driven by pressure gradient. It can effectively remove dissolved salt colloids and organic matters in water like molecular filter. The reverse osmosis process is the reverse process of natural osmosis.

The principle of RO water treatment machinery is that raw water passes through reverse osmosis system under high pressure, and the solvent in water diffuses from low concentration to high concentration to achieve the purpose of separation, purification and concentration. Reverse osmosis water treatment system can remove bacteria, viruses, colloid, organic matter and more than 99% soluble salts in water. The equipment has the characteristics of low operation cost, simple operation, high automation degree and stable effluent quality.

Reverse osmosis water treatment equipment is usually composed of three parts: raw water pretreatment system, reverse osmosis purification system and ultra-purification post-treatment system.

Techinical ParameterCapacity3 Ton/24hoursRefrigerantR22/R404A/R507/R449Compressor BrandCopeland/Bitzer/RefcompCooling WayWater/Air CoolingCompressor Power14/12 HPIce Cutter Motor1.5 KWPower of Circulating Water Pump0.37 KWPower of Water Cooling Pump1.5 KWCooling Tower Motor0.55 KWCooling Fan Motor1.7 KWMachinery Unit Size(L*W*H)2100mm*1650mm*2110mmInput Water Temp21degrees CelsiusEvaporating Temp25degrees CelsiusCondensing Temp40degrees CelsiusSupply power380V/50Hz(60Hz)/3P; 220V(230V)/50Hz/1P; 220V/60Hz/3P(1P); 415V/50Hz/3P; 440V/60Hz/3P.The above data is subjected to the final design without

Product Description   Anti-corrosion materials. Seawater contains salt, which has a corrosive effect on materials. Therefore, as long as the seawater ice machine is in contact with water, special anti-corrosion materials are required.Anti-wind and wave hull tilting, which requires special treatment for the refrigeration system and ice-making system.The compressor returns oil quickly.

Product Description   1. Anti-corrosion materials. Seawater contains salt, which has a corrosive effect on materials. Therefore, as long as the seawater ice machine is in contact with water, special anti-corrosion materials are required. 2. Anti-wind and wave hull tilting, which requires special treatment for the refrigeration system and ice-making system. 3. The compressor returns oil quickly.

3 ton tube ice machine is equipped with various protection design such as compressor high pressure, compressor low pressure and compressor oil pressure, low water level, water flow, full ice, etc. It makes the machine run smoothly in over 30000 hours.Tube ice is transparent and sanitary, not easy to melt. Its inner and outer diameter can be adjusted for your requirements.

Products Description1.Anti-corrosion materials. Seawater contains salt, which has a corrosive effect on materials. Therefore, as long as the seawater ice machine is in contact with water, special anti-corrosion materials are required. 2. Anti-wind and wave hull tilting, which requires special treatment for the refrigeration system and ice-making system. 3. The compressor returns oil quickly.

Products DescriptionThe Advanced Screw Chiller Machine for Precise Temperature Control is a state-of-the-art cooling system designed to provide exceptional temperature control accuracy for various industrial applications.

 Industrial Open type Water Chiller1. Screw machine chiller characteristics(1) The water-cooled screw machine is generally an open upper and lower structure of the chiller. Simple structure, less moving parts, convenient installation and debugging, reliable operation, low cost;(2) the single machine has large cooling capacity and high volumetric efficiency;(3) the cooling capacity can be stepless adjustment.2. Control systeThe controller of  screw chiller, all electrical parts adopt Schneider brand.

Flake ice is dry, pure, powder-less,  not easy to block. Flake ice thickness is about 1.8mm-2mm, without edges or corners which can protect the cooling food, fish, seafood and other products. Flake ice has a large surface area, a target object can be cooled down quickly.

500 kg per day tube ice machine is the smallest capacity of tube ice machine, which produces cylinder shape ice with a hole in the middle; it adopts flooded evaporator. which improves ice making efficiency and capacity. Meanwhile, compact structure design can save installation space. Ice thickness and hollow part size can be adjusted according to customer requirements. Under PLC program control system to work automatically, the machine has high capacity, low-power consumption, and minimal maintenance.Products Features: 1.

Products IntroductionRobin marine seawater flake ice machine use sea water to make ice. The biggest difference between fresh water flake ice machines is the design of the material and the compressor of the ice making machine. As the inlet of marine seawater flake ice machine is sea water, in order to overcome the corrosion of seawater, marine seawater flake ice machine adopts special pipe material.

Product IntroductionWe are pleased to launch a 20 ton seawater slurry ice machine to the global market. This slurry ice machine has a daily production capacity of up to 20 tons, which can meet the freezing and preservation needs of many large fishing vessels. By combining advanced seawater treatment technology with innovative fluidized ice making technology, not only is the sustainable utilization of natural resources achieved, but also the purity, delicacy, and stability of the produced ice slurry are guaranteed.

The main reason for the good quality of the ice machine produced by our company is that the compressor, condenser, expansion valve, PLC controller and other important parts are imported. The equipment has good performance and strong anti-interference ability. The external environment has an impact on the output and ice.

New ProductWe are proud to launch the 20Ton Seawater Slurry Flow Liquid Ice Making Machine to the global market. This revolutionary slurry ice machine, with its daily production capacity of up to 20 tons of seawater slurry ice, redefines the boundary between ocean resource utilization and efficient ice production. By combining advanced seawater treatment technology with innovative fluidized ice making technology, it not only achieves sustainable utilization of natural resources, but also ensures the purity, delicacy, and stability of the produced ice slurry.

Our 2 ton tube ice machine is both used in customer consuming and cooling systems, and it's also widely used in restaurants, fast-food stores, supermarkets, healthcare centers, schools, Night clubs & bars, meat plants etc. This tube ice machine is environmentally safe, using Freon refrigerant. All surfaces that contact with water are stainless steel. Tube ice is tasteless, sanitary, transparent, fully meets with the food standard.

Robin tube ice machine is a type ice machine, which produces cylinder shape ice with a hole in the middle; it adopts flooded evaporator model, which improves ice making efficiency and capacity. Meanwhile, compact structure design can save installation space. Ice thickness and hollow part size can be adjusted according to customer requirements.

Products IntroductionJinan Robin Machine Co., Ltd. has the latest masterpiece - 2-ton high-efficiency seawater flake ice machine. This machine is equipped with the industry's top high-performance compressor, and selected materials and precision components, through the ingenious design, tailor-made for marine vessels in the harsh marine environment.

The evaporator is a vertical drum structure, composed of ice - making main components, ice cutter, main shaft, water separator, baffle plate. They rotate slowly counterclockwise with the help of the speed reducer. Water enters the water separator from the inlet of the ice-making machine evaporator, and is evenly sprinkled on the inner wall of the evaporator through the sprinkling pipe to form a water film.

Features:1. Waterproof structure, double front door design, made of thick steel plate, outdoor powder spraying surface is luxurious and beautiful, easy to maintain and install.2. Parts in contact with ice and water are made of food-grade 304 stainless steel.Advanced and stable vending technology, one control panel controls the sales of water and ice.3.

Products Description1.Equipped with international brand hermetic scroll compressor, low noise, high efficiency, long life, and low failure rate.2.Evaporator and condenser made of high efficiency red cooper (anti-corrosion material can also be used), high heat transferring efficiency;3.Throttle valve and expansion valves are world famous brand, to maximize the cooling ability and ensure high stability;4.Equipped with imported pumps, good stability of equilibrium, watertight, ensure stable and sustainable flow of chilled water;5.Equipped with a stainless steel water tank6.Equipped with a full-fe

Features:1. Efficient and stable packaging technology, automatic bagging, bagging, ice filling and bag sealing. No manual intervention is required.2. Sell loose ice or bagged ice to meet different needs.3. Automatic ice making, stop selling when ice is full, ice is exhausted, water is exhausted, bag is exhausted, etc. Use GSM system to report machine status.4. Advanced reverse osmosis purification technology, nine-layer water filtration.