New ProductWe are proud to launch the 20Ton Seawater Slurry Flow Liquid Ice Making Machine to the global market. This revolutionary slurry ice machine, with its daily production capacity of up to 20 tons of seawater slurry ice, redefines the boundary between ocean resource utilization and efficient ice production. By combining advanced seawater treatment technology with innovative fluidized ice making technology, it not only achieves sustainable utilization of natural resources, but also ensures the purity, delicacy, and stability of the produced ice slurry.
Contact Now
Product IntroductionThe slurry ice machine compresses the refrigerant into a high-temperature and high-pressure liquid state through a compressor, and then the liquid refrigerant is cooled into a medium temperature and high-pressure liquid state in the condenser, and then flows into the evaporator to absorb the heat from the ice water mixture, causing it to freeze.
Contact Now
Product InformationThe shape of the ice is a plate ice, theevaporator have two technologies: flat liquid film heating exchange technology and double-side formed ice technology and have many S-type heating pipes which design according to the hot-runner and adopt the heating dropping ice technology, so the machine not have any wear and tear.The ice making system is the multiple system that making ice dependent and have the dropping ice function, shorten the ice-making period, the full equipment have good anti-corrosive function, anti-shock and resist pressure performance.
Contact Now
Functional Features:1. The hydraulic pump station and particle forming module are all built in, which on the one hand reduces the footprint of the equipment and on the other hand makes the dry ice production avoid the influence of dust.2. Touch type liquid crystal panel operation, can set the hydraulic cylinder cleaning times, working time and so on, reduce the error rate of manual operation.3.
Contact Now
Product InformationThe design and working principle of the ice making machine make it an efficient ice making device. Its main components include an ice cylinder, ice skates, water supply system, transmission system, and refrigeration system. During the ice making process, low-temperature refrigerant liquid enters the cylinder interlayer through the hollow shaft at the end of the cylinder, evaporates and absorbs heat to form steam, which is then compressed and condensed through the outer interlayer of the hollow shaft before being recycled for use.
Contact Now
Product InformationA slurry ice machine is a special ice making equipment that mixes tiny ice crystals with an aqueous solution to form a semi liquid state of flowing ice. This type of ice has a unique form and is therefore also known as a slurry machine, flow ice machine, or fluid ice. The principle of a fluidized ice machine is to rapidly cool liquid water through special freezing technology, causing it to quickly solidify into tiny ice crystals, which are mixed with a small amount of aqueous solution to form the unique form of fluidized ice.
Contact Now
Seawater Slurry Ice Making SystemWhat is Seawater Slurry IceWith wide experience in ice making equipment for more than one decade, ROBIN can design and fabricate different types of seawater & brine water slurry ice making equipment suitable for varied applications. Seawater ice crystals, when mixed with chilled seawater, turns to gel status, which is called liquid/slurry/fluid ice.Ours Slurry Ice MachineWe have been working in the field of automatic ice making machines for a long time and have extensive experience in this area.
Contact Now
Dry ice pellet granule machine is used for producing high density dry ice slices and dry ice slabs.The machines are widely used for refrigerated logistics in the airport, cooled transportation of fresh food, and entertainment industry. The Machines are very suitable for liquid CO2 gas company or station users.Functional Features:1. The fuselage adopts fully enclosed design, which makes the equipment more integrated, reduces the noise of the equipment during work, and prevents the danger caused by the personnel's mistouch during work.2. The core electrical parts are original.3.
Contact Now
Dry ice block machine is used for producing high density dry ice blocks, dry ice slices and dry ice slabs.The machines are widely used for refrigerated logistics in the airport, cooled transportation of fresh food, and entertainment industry. The Machines are very suitable for liquid CO2 gas company or station users.Functional Features:1. The hydraulic pump station and particle forming module are all built in, which on the one hand reduces the footprint of the equipment and on the other hand makes the dry ice production avoid the influence of dust.2.
Contact Now
Product InformationWe are proud to introduce this high-performance 5-ton Subcooled Seawater Slurry Ice Making Machine, which is a top of the line refrigeration equipment designed specifically for efficient and rapid cooling needs. This device adopts advanced direct evaporation ultra cold seawater ice making technology in China, which greatly solves the problem of sharp efficiency decline in traditional ice making machines during long-term ice making process, and significantly reduces the energy consumption per ton of ice.Robin Slurry Ice Machine Features1.
Contact Now
FeaturesReasonable design for the framework structure with stainless steel 304, save space, and easy to install; Greatly save energy, only 80-85KW*H are consumed to produce one-ton ice;Equipped with Siemens PLC central program control, which allows multiple functions such as automatic machine start and shut down; ice stopping production when the ice bins are full, Automatic water making up; Special ice outlet. Ice discharging automatically, No need taking ice by hand which can guarantee the ice clean and sanitary, meanwhile, it is matched with ice packing sy
Contact Now
Robin tube ice machine is a type ice machine produces cylinder shape ice with a hole in the middle; it adopts flooded evaporator model, which improves ice making efficiency and capacity. Meanwhile, compact structure design can save installation space.
Contact Now
Tube ice machine is a type of ice machine, which produces cylinder shape ice with a hole in the middle; it adopts flooded
evaporator model, which improves ice making efficiency and capacity. Meanwhile, compact structure design can save installation space. Ice thickness and hollow part size can be adjusted according to customer requirements.
Contact Now
The water-flowing mode automatic ice cube making machine adopts the microcomputer detection and control system, which is fully automatic design. The power is also cut off when the power is off, the water is also cut off, and the ice is automatically stopped. The water-flowing mode automatic ice cube making machine uses imported compressors and an upright high-efficiency ice tray for fast ice production, saving time and effort.Features1. Efficient ice production: Rapidly produces large quantities of ice.2. Premium ice quality: Delivers clean, transparent, and uniform ice cubes.3.
Contact Now
Robin tube ice machines are composed ice evaporator,liquid storage tank,steam valve,control cabinet,various valves and connections pipeline so on.Tube ice machine is equipped with the intelligent prograam parts，such as low water level,water flow,ice-full sensor,high&low pressure and so on,then the ice machines are more stable and secure,it is more convenient operation and maintenance.Technical parameters of 15 ton Tube ice machine:Capacity15 Ton/24hoursRefrigerantR22/R404A/R507/R449Compressor BrandBitzer/RefcompCooling WayWater CoolingTotal input power (kw)75 KWCompressor input power (kw)7
Contact Now
8 ton Flake ice machine is a kind of ice making machine, generally for industrial ice making machines. The ice produced is a thin flake. Sheet ice can be made from fresh water or salt water. The ice rake system is generally used in conjunction with ice making equipment and installed in the ice storage cold storage. It can effectively use space to store ice.
Contact Now
Tube ice machine is a type of ice machine, which produces cylinder shape ice with a hole in the middle; it adopts flooded
evaporator model, which improves ice making efficiency and capacity. Meanwhile, compact structure design can save installation space. Ice thickness and hollow part size can be adjusted according to customer requirements.
Contact Now
500 kg per day tube ice machine is the smallest capacity of tube ice machine, which produces cylinder shape ice with a hole in the middle; it adopts flooded evaporator. which improves ice making efficiency and capacity. Meanwhile, compact structure design can save installation space. Ice thickness and hollow part size can be adjusted according to customer requirements. Under PLC program control system to work automatically, the machine has high capacity, low-power consumption, and minimal maintenance.Products Features: 1.
Contact Now
The 3 ton cube ice machine is a fully automatic edible ice maker that adopts self-adjustment of ice cube thickness, self-adaptation of ambient temperature, automatic water replenishment and automatic ice-forming and de-icing. Intelligent control: Siemens PLC control design, one-key operation, water replenishment, ice making, de-icing is completed automatically; automatically adapt to the ambient temperature, ice thickness can be adjusted.Product FeaturesRigorous pick-up of raw material. Not every kind of Stainless Steel is the same in terms quality on the market.
Contact Now
Brine refrigeration block ice machine is a kind of ice making method using salt water as heat exchange medium.It uses shell-tube or coil evaporator as a tool for heat exchange between refrigerant and salt water.
Contact Now
The large-scale edible ice cube machine is a large-capacity ice making machine that produces ice cubes. The ice cube machine is widely used in catering and cold drink shops and other fields.Product featuresThere are two ice cube sizes: 22mmx22mx22mm, 29mmx29mmx22m1. Large production: its production can reach 90% to 95%. If environment temperature is lower than 23centi degrees, production can reach 100% to 130%.( About a small cube ice machine, its production can reach 50% to 60% in summer)2.
Contact Now
Robin plate ice maker masters two unique technologies: flat-plate heat exchange technology & circulating heat gas for ice dropping technology.
Contact Now
Tube ice is in the shape of crystal and powderless tubes. Comprared with flake ice, the melting time of tube ice is longer, and it is more suitable for cooling in an unisulated environment.
Contact Now
ROBIN is providing the world excellent tube ice solutions with high ice output, reliable performance and humanization design.Tube ice is in the shape of crystal and powderless tubes. Comprared with flake ice, the melting time of tube ice is longer, and it is more suitable for cooling in an unisulated environment.
Contact Now
Español
العربية
Francés
Português