ice and water vending machine-manufacture,factory,supplier from China

(Total 24 Products for ice and water vending machine)
Features:1. Waterproof structure, double front door design, made of thick steel plate, outdoor powder spraying surface is luxurious and beautiful, easy to maintain and install.2. Parts in contact with ice and water are made of food-grade 304 stainless steel.Advanced and stable vending technology, one control panel controls the sales of water and ice.3.
  Contact Now
Features:1. Efficient and stable packaging technology, automatic bagging, bagging, ice filling and bag sealing. No manual intervention is required.2. Sell loose ice or bagged ice to meet different needs.3. Automatic ice making, stop selling when ice is full, ice is exhausted, water is exhausted, bag is exhausted, etc. Use GSM system to report machine status.4. Advanced reverse osmosis purification technology, nine-layer water filtration.
  Contact Now
Reverse osmosis (RO) is a kind of membrane separation process driven by pressure gradient. It can effectively remove dissolved salt colloids and organic matters in water like molecular filter. The reverse osmosis process is the reverse process of natural osmosis.
  Contact Now
The reverse osmosis equipment adopts the reverse osmosis infiltration filtration process, which is amodern and new type of pure water treatment technology.
  Contact Now
Reverse osmosis water treatment equipment is usually composed of three parts: raw water pretreatment system, reverse osmosis purification system and ultra-purification post-treatment system.
  Contact Now
The principle of RO water treatment machinery is that raw water passes through reverse osmosis system under high pressure, and the solvent in water diffuses from low concentration to high concentration to achieve the purpose of separation, purification and concentration. Reverse osmosis water treatment system can remove bacteria, viruses, colloid, organic matter and more than 99% soluble salts in water. The equipment has the characteristics of low operation cost, simple operation, high automation degree and stable effluent quality.
  Contact Now
Robin automatic ice packing is mainly used for tube ice packing.  It full-automatic weigh-form-fill-seal type, applying advanced operating system, easy to use and reprogramable. Robin automatic ice packing is mainly used for tube ice packing.  It full-automatic weigh-form-fill-seal type, applying advanced operating system, easy to use and reprogramable.
  Contact Now
Cold room can meet your item storage requirements, including cold room drawing design, cold room manufacturing and cold room installation. Please let us know your detailed requirements such as usage, temperature or your special requirements for budget or energy saving.
  Contact Now
Product InformationThe design and working principle of the ice making machine make it an efficient ice making device. Its main components include an ice cylinder, ice skates, water supply system, transmission system, and refrigeration system. During the ice making process, low-temperature refrigerant liquid enters the cylinder interlayer through the hollow shaft at the end of the cylinder, evaporates and absorbs heat to form steam, which is then compressed and condensed through the outer interlayer of the hollow shaft before being recycled for use.
  Contact Now
Products DescriptionThe Advanced Screw Chiller Machine for Precise Temperature Control is a state-of-the-art cooling system designed to provide exceptional temperature control accuracy for various industrial applications.
  Contact Now
 Industrial Open type Water Chiller1. Screw machine chiller characteristics(1) The water-cooled screw machine is generally an open upper and lower structure of the chiller. Simple structure, less moving parts, convenient installation and debugging, reliable operation, low cost;(2) the single machine has large cooling capacity and high volumetric efficiency;(3) the cooling capacity can be stepless adjustment.2. Control systeThe controller of  screw chiller, all electrical parts adopt Schneider brand.
  Contact Now
Techinical ParameterCapacity3 Ton/24hoursRefrigerantR22/R404A/R507/R449Compressor BrandCopeland/Bitzer/RefcompCooling WayWater/Air CoolingCompressor Power14/12 HPIce Cutter Motor1.5 KWPower of Circulating Water Pump0.37 KWPower of Water Cooling Pump1.5 KWCooling Tower Motor0.55 KWCooling Fan Motor1.7 KWMachinery Unit Size(L*W*H)2100mm*1650mm*2110mmInput Water Temp21degrees CelsiusEvaporating Temp25degrees CelsiusCondensing Temp40degrees CelsiusSupply power380V/50Hz(60Hz)/3P; 220V(230V)/50Hz/1P; 220V/60Hz/3P(1P); 415V/50Hz/3P; 440V/60Hz/3P.The above data is subjected to the final design without
  Contact Now
The main reason for the good quality of the ice machine produced by our company is that the compressor, condenser, expansion valve, PLC controller and other important parts are imported. The equipment has good performance and strong anti-interference ability. The external environment has an impact on the output and ice.
  Contact Now
Products IntroductionRobin marine seawater flake ice machine use sea water to make ice. The biggest difference between fresh water flake ice machines is the design of the material and the compressor of the ice making machine. As the inlet of marine seawater flake ice machine is sea water, in order to overcome the corrosion of seawater, marine seawater flake ice machine adopts special pipe material.
  Contact Now
Our 2 ton tube ice machine is both used in customer consuming and cooling systems, and it's also widely used in restaurants, fast-food stores, supermarkets, healthcare centers, schools, Night clubs & bars, meat plants etc. This tube ice machine is environmentally safe, using Freon refrigerant. All surfaces that contact with water are stainless steel. Tube ice is tasteless, sanitary, transparent, fully meets with the food standard.
  Contact Now
Robin tube ice machine is a type ice machine, which produces cylinder shape ice with a hole in the middle; it adopts flooded evaporator model, which improves ice making efficiency and capacity. Meanwhile, compact structure design can save installation space. Ice thickness and hollow part size can be adjusted according to customer requirements.
  Contact Now
Products IntroductionJinan Robin Machine Co., Ltd. has the latest masterpiece - 2-ton high-efficiency seawater flake ice machine. This machine is equipped with the industry's top high-performance compressor, and selected materials and precision components, through the ingenious design, tailor-made for marine vessels in the harsh marine environment.
  Contact Now
The evaporator is a vertical drum structure, composed of ice - making main components, ice cutter, main shaft, water separator, baffle plate. They rotate slowly counterclockwise with the help of the speed reducer. Water enters the water separator from the inlet of the ice-making machine evaporator, and is evenly sprinkled on the inner wall of the evaporator through the sprinkling pipe to form a water film.
  Contact Now
Products Description1.Equipped with international brand hermetic scroll compressor, low noise, high efficiency, long life, and low failure rate.2.Evaporator and condenser made of high efficiency red cooper (anti-corrosion material can also be used), high heat transferring efficiency;3.Throttle valve and expansion valves are world famous brand, to maximize the cooling ability and ensure high stability;4.Equipped with imported pumps, good stability of equilibrium, watertight, ensure stable and sustainable flow of chilled water;5.Equipped with a stainless steel water tank6.Equipped with a full-fe
  Contact Now
Robin direct cooling ice block machine is a new type of ice machine in which the refrigerant evaporates inside the evaporator, and directly cools the water into ice. It has higher ice freezing speed and lower power consumption. And the ice hardness is higher too.
  Contact Now
Product DescriptionSlurry ice is a unique chilling medium and is formed out of seawater of a mixture of fresh water and salt.
  Contact Now
3 ton tube ice machine is equipped with various protection design such as compressor high pressure, compressor low pressure and compressor oil pressure, low water level, water flow, full ice, etc. It makes the machine run smoothly in over 30000 hours.Tube ice is transparent and sanitary, not easy to melt. Its inner and outer diameter can be adjusted for your requirements.
  Contact Now
RBC-2T whose capacity is 2 tons cube ice per day, adopts with water cooling system. That's to say, there are two parts of it.One is the compressor unit and ice making system.The other is cooling tower. You just need to connect the water pipes, water pump and power wires. Our machine is controlled by a PLC system.
  Contact Now
Product IntroductionThe slurry ice machine compresses the refrigerant into a high-temperature and high-pressure liquid state through a compressor, and then the liquid refrigerant is cooled into a medium temperature and high-pressure liquid state in the condenser, and then flows into the evaporator to absorb the heat from the ice water mixture, causing it to freeze.
  Contact Now
Relate News
1 ton seawater flake ice machine completed and shipped  The 1-ton seawater flake ice machine customized for a Spanish customer has been manufactured and shipped. A Spanish customer customized a seawater flake ice machine from us, using a Bitzer compressor and water cooling. Stainless steel 316 and R449 refrigerant were selected.  The seawater flake ice machine with a daily ice output of 1 ton will be used by customers on fishing boats. It is made of SUS316 high-strength and seawater corrosion-resistant material.
Mali customers of ROBIN visited the factoryThe following is a customer from Mali visiting the ROBIN ice machine factory. The customer purchased salt water brick ice machine and quality brick ice machine from ROBIN ice machine company. The voltage is 380v, 50hz. The condensation method is classified cooling. At present, the machine has been completed. The customer came to visit the factory and was very satisfied after the visit. 
    ROBIN is proud to present its latest direct cooling brick ice machine, which has a capacity of 10 tons per day and is in the process of being manufactured.ROBIN's direct cooling brick ice machine has not only greatly improved the production efficiency, but also made a qualitative leap in the details of design and technological innovation.Especially worth mentioning is that, for such a large scale of ice production, our well-designed ice pusher is undoubtedly one of the core highlights of the product.
Congolese customers visited the factory and placed an order for a 5-ton seawater flake ice machine   Customers from Congo, Africa wanted to visit our factory. After the he was very satisfied with our factory and machines, and placed an order for a 5-ton seawater flake ice machine with our company.The customer has his own freight forwarder in Guangzhou.
This is a 1-ton flake ice machine that has been packed today and is ready to be sent to Reunion Island. In addition to the flake ice machine, there is also a cold storage suitable for storing flake ice, which will be packaged together and sent to the destination.
The one-ton flake ice machine produced by ROBIN Ice Machine for a Greek customer has been completed and is ready for shipmentROBIN Ice Machine Company has completed a one-ton flake ice machine for a Greek customer. The ice machine uses 220V, 50HZ, Copeland compressor, and air cooling. At the same time, the condenser is enlarged to make the ice machine production more sufficient. The machine has been completed and is ready for shipment.  1.
Here is a one tonne cube ice machine that ROBIN Ice Machines has built for a customer in Georgia. The size of the ice is 22*22*22mm, the machine has arrived at the customer's place, the customer put it into use and is very satisfied with it.The following are the advantages of ROBIN's commercial cube ice machine.Easy to use: the pellet ice machine is easy to operate, only need to access the water source and power supply, you can automatically make ice.
The customized 10-ton tube ice machine for a Mexican customer was produced and boxed for shipment. These are the last two of the three customized tube ice machines. It adopts BITZER compressor and PLC control system, which is of high quality and easy and safe to operate. The machines are easy to operate and safe. They have been packed and shipped to Mexico recently.
Customized 1 ton cube ice machine for Peruvian customers  Peruvian customer ordered a 1-ton cube ice machine from our company and we shipped it to the customer. The customer used 220V60HZ3P voltage, Copeland compressor, and water cooling. After sending the test video to the customer, the customer was very satisfied with our machine, and we will transport the machine to the port for the customer.  This 1-ton cube ice machine is a high-efficiency appliance designed to produce a steady supply of granular ice.
The 1-ton cube ice machine customized for Peruvian customers is being tested  The 1-ton cube ice machine customized for Peruvian customers was completed and tested successfully. The customer was very satisfied and prepared to ship it. The customer used three-phase voltage, Copeland compressor, Siemens PLC program controller, water cooling, and LS electrical components.  The cube ice machine is an efficient, energy-saving and hygienic ice-making equipment.