500l/h RO Pure Water Treatment Filtration Machine-manufacture,factory,supplier from China

(Total 24 Products for 500l/h RO Pure Water Treatment Filtration Machine)
The reverse osmosis equipment adopts the reverse osmosis infiltration filtration process, which is amodern and new type of pure water treatment technology.
  Contact Now
Reverse osmosis (RO) is a kind of membrane separation process driven by pressure gradient. It can effectively remove dissolved salt colloids and organic matters in water like molecular filter. The reverse osmosis process is the reverse process of natural osmosis.
  Contact Now
The principle of RO water treatment machinery is that raw water passes through reverse osmosis system under high pressure, and the solvent in water diffuses from low concentration to high concentration to achieve the purpose of separation, purification and concentration. Reverse osmosis water treatment system can remove bacteria, viruses, colloid, organic matter and more than 99% soluble salts in water. The equipment has the characteristics of low operation cost, simple operation, high automation degree and stable effluent quality.
  Contact Now
Reverse osmosis water treatment equipment is usually composed of three parts: raw water pretreatment system, reverse osmosis purification system and ultra-purification post-treatment system.
  Contact Now
Techinical ParameterCapacity3 Ton/24hoursRefrigerantR22/R404A/R507/R449Compressor BrandCopeland/Bitzer/RefcompCooling WayWater/Air CoolingCompressor Power14/12 HPIce Cutter Motor1.5 KWPower of Circulating Water Pump0.37 KWPower of Water Cooling Pump1.5 KWCooling Tower Motor0.55 KWCooling Fan Motor1.7 KWMachinery Unit Size(L*W*H)2100mm*1650mm*2110mmInput Water Temp21degrees CelsiusEvaporating Temp25degrees CelsiusCondensing Temp40degrees CelsiusSupply power380V/50Hz(60Hz)/3P; 220V(230V)/50Hz/1P; 220V/60Hz/3P(1P); 415V/50Hz/3P; 440V/60Hz/3P.The above data is subjected to the final design without
  Contact Now
Features:1. Efficient and stable packaging technology, automatic bagging, bagging, ice filling and bag sealing. No manual intervention is required.2. Sell loose ice or bagged ice to meet different needs.3. Automatic ice making, stop selling when ice is full, ice is exhausted, water is exhausted, bag is exhausted, etc. Use GSM system to report machine status.4. Advanced reverse osmosis purification technology, nine-layer water filtration.
  Contact Now
Product Description   Anti-corrosion materials. Seawater contains salt, which has a corrosive effect on materials. Therefore, as long as the seawater ice machine is in contact with water, special anti-corrosion materials are required.Anti-wind and wave hull tilting, which requires special treatment for the refrigeration system and ice-making system.The compressor returns oil quickly.
  Contact Now
Product Description   1. Anti-corrosion materials. Seawater contains salt, which has a corrosive effect on materials. Therefore, as long as the seawater ice machine is in contact with water, special anti-corrosion materials are required. 2. Anti-wind and wave hull tilting, which requires special treatment for the refrigeration system and ice-making system. 3. The compressor returns oil quickly.
  Contact Now
Functional Features:1. The body is made of stainless steel and fully enclosed design, which makes the equipment more integrated, reduces the noise when the equipment is working, prevents the danger caused by personnel's mistouch when working, and makes the work safer.2.
  Contact Now
Products Description1.Anti-corrosion materials. Seawater contains salt, which has a corrosive effect on materials. Therefore, as long as the seawater ice machine is in contact with water, special anti-corrosion materials are required. 2. Anti-wind and wave hull tilting, which requires special treatment for the refrigeration system and ice-making system. 3. The compressor returns oil quickly.
  Contact Now
Products DescriptionThe Advanced Screw Chiller Machine for Precise Temperature Control is a state-of-the-art cooling system designed to provide exceptional temperature control accuracy for various industrial applications.
  Contact Now
Functional Features:1.  The fuselage is made of stainless steel and has a fully enclosed design, which makes the equipment more integrated, reduces the noise when the equipment is working, and prevents dangers caused by accidental touching by personnel during work. 2.  The hydraulic pump station and particle forming module are both built-in, which on the one hand reduces the equipment’s footprint and on the other hand avoids the impact of dust in dry ice production. 3.  Touch-sensitive LCD panel operation allows you to set the number of purges, working h
  Contact Now
Specifications:Model NO.RBI-1050Output ibs./24h1000bs/450kgIce storage240kgDimension (l*w*h)770*830*2050mmNet weightABOUT 150kgRate Power2350Wvoltage220VIce storage binStainless steel 304 with ABS plastic MaterialCompressorKK/Danfoss/Aspera/TecumsehExpansion valveDanfosselectronic boardLANGTUOevaporatorLANGTUOWater PumpEBM/ NIUDUN MotorsCertificationCE,RoHS,ISO9001:2008Dry filterDanfossIce machine typewater-flow systemCondenserAir cooling or Water coolingIce Cube Machine Features:• 304# stainless steel.
  Contact Now
 Industrial Open type Water Chiller1. Screw machine chiller characteristics(1) The water-cooled screw machine is generally an open upper and lower structure of the chiller. Simple structure, less moving parts, convenient installation and debugging, reliable operation, low cost;(2) the single machine has large cooling capacity and high volumetric efficiency;(3) the cooling capacity can be stepless adjustment.2. Control systeThe controller of  screw chiller, all electrical parts adopt Schneider brand.
  Contact Now
Flake ice is dry, pure, powder-less,  not easy to block. Flake ice thickness is about 1.8mm-2mm, without edges or corners which can protect the cooling food, fish, seafood and other products. Flake ice has a large surface area, a target object can be cooled down quickly.
  Contact Now
Quick DetailsApplicable Industries: For Seafood CoolingCondition:  NewIce Shape:  slurryVoltage:  380V/220VPower:  10KWDimension(L*W*H):  1150*1000*1100mmWeight: 520KGCertification:  CEWarranty:  1 YearAfter-sales Service Provided:  Free spare parts, Field installation, commissioning and training, Field maintenance and repair service, Video technical support, Online support, Engineers available to service machinery overseasMaterial:  Stainless SteelRefrigerant:  R22/R404aCooling way:  
  Contact Now
Robin 1 ton cube ice machine,reasonable design for the framework structure with stainless steel 304, save space, and easy to install;Greatly save energy, only 80-85KW*H are consumed to produce one-ton ice;Equipped with Siemens PLC central program control, which allows multiple functions such as automatic machine start and shut down; ice stopping production when the ice bins are full, Automatic water making up;Special ice outlet.
  Contact Now
FeaturesReasonable design for the framework structure with stainless steel 304, save space, and easy to install; Greatly save energy, only 80-85KW*H are consumed to produce one-ton ice;Equipped with Siemens PLC central program control, which allows multiple functions such as automatic machine start and shut down; ice stopping production when the ice bins are full, Automatic water making up;  Special ice outlet. Ice discharging automatically, No need taking ice by hand which can guarantee the ice clean and sanitary, meanwhile, it is matched with ice packing sy
  Contact Now
Products IntroductionRobin marine seawater flake ice machine use sea water to make ice. The biggest difference between fresh water flake ice machines is the design of the material and the compressor of the ice making machine. As the inlet of marine seawater flake ice machine is sea water, in order to overcome the corrosion of seawater, marine seawater flake ice machine adopts special pipe material.
  Contact Now
The main reason for the good quality of the ice machine produced by our company is that the compressor, condenser, expansion valve, PLC controller and other important parts are imported. The equipment has good performance and strong anti-interference ability. The external environment has an impact on the output and ice.
  Contact Now
Product IntroductionWe are pleased to launch a 20 ton seawater slurry ice machine to the global market. This slurry ice machine has a daily production capacity of up to 20 tons, which can meet the freezing and preservation needs of many large fishing vessels. By combining advanced seawater treatment technology with innovative fluidized ice making technology, not only is the sustainable utilization of natural resources achieved, but also the purity, delicacy, and stability of the produced ice slurry are guaranteed.
  Contact Now
Our 2 ton tube ice machine is both used in customer consuming and cooling systems, and it's also widely used in restaurants, fast-food stores, supermarkets, healthcare centers, schools, Night clubs & bars, meat plants etc. This tube ice machine is environmentally safe, using Freon refrigerant. All surfaces that contact with water are stainless steel. Tube ice is tasteless, sanitary, transparent, fully meets with the food standard.
  Contact Now
New ProductWe are proud to launch the 20Ton Seawater Slurry Flow Liquid Ice Making Machine to the global market. This revolutionary slurry ice machine, with its daily production capacity of up to 20 tons of seawater slurry ice, redefines the boundary between ocean resource utilization and efficient ice production. By combining advanced seawater treatment technology with innovative fluidized ice making technology, it not only achieves sustainable utilization of natural resources, but also ensures the purity, delicacy, and stability of the produced ice slurry.
  Contact Now
5 tons 24 hrs seawater flake ice machine RBSF-5T is widely used in seaport for fish cooling. The seawater type flake ice machine is using anti-corrosion material for evaporator. So it is able to use seawater as water source for ice making. We have built several auto flake ice projects in many countries. The systems are consist of containerized flake ice machine, cold storage with raking system, auto ice weighing system.Sea Water type Flake Ice Machine ParametersModelDaily Output (T/24h)Cooling methodCompressor PowerCooling CapacityGeneral  PowerUnit Size(L*W*H mm)Unit N.W.
  Contact Now
Relate News
Mali customers of ROBIN visited the factoryThe following is a customer from Mali visiting the ROBIN ice machine factory. The customer purchased salt water brick ice machine and quality brick ice machine from ROBIN ice machine company. The voltage is 380v, 50hz. The condensation method is classified cooling. At present, the machine has been completed. The customer came to visit the factory and was very satisfied after the visit. 
Here is a one tonne cube ice machine that ROBIN Ice Machines has built for a customer in Georgia. The size of the ice is 22*22*22mm, the machine has arrived at the customer's place, the customer put it into use and is very satisfied with it.The following are the advantages of ROBIN's commercial cube ice machine.Easy to use: the pellet ice machine is easy to operate, only need to access the water source and power supply, you can automatically make ice.
This is Jinan Robin Machinery Co., Ltd. completed the manufacture of small flake ice machine, production capacity of 1 tons / 24 hours, the material is all stainless steel, the use of air-cooled, no problems in the trial process, the operation is normal! Diversion disk diversion of water flow is smooth, the thickness of the flake ice is uniform, 1.6-2.3MM flake, strong stability, ice survival time is longer, generally placed in a small cold storage to save convenient access.
The flake ice machine evaporator produced by Robin Ice Machine for a customer in Mozambique has been completedThe flake ice machine evaporator produced by Robin Ice Machine for a customer in Mozambique has been completed and is ready for shipment. The customer is very satisfied  1. Convenience: Flake ice maker has a very convenient way to use, you just need to pour water into the ice maker and then control the switch to the desired temperature to start making ice chips.
1 ton flake ice machine evaporator is completed   The 1-ton flake ice machine evaporator customized for Mozambique customers has been completed. The customer customized two 1-ton flake ice machine evaporators in our factory, using 380V50hz3p voltage. And equipped with an electric control box (to control the evaporator water pump and sensor). The customer chose chrome-plated carbon steel for the inner tank and SS304 for the outer shell.   The evaporator of the flake ice machine is the core component of the flake ice machine.
1 ton seawater flake ice machine completed and shipped  The 1-ton seawater flake ice machine customized for a Spanish customer has been manufactured and shipped. A Spanish customer customized a seawater flake ice machine from us, using a Bitzer compressor and water cooling. Stainless steel 316 and R449 refrigerant were selected.  The seawater flake ice machine with a daily ice output of 1 ton will be used by customers on fishing boats. It is made of SUS316 high-strength and seawater corrosion-resistant material.
The 1-ton cube ice machine customized for Peruvian customers is being tested  The 1-ton cube ice machine customized for Peruvian customers was completed and tested successfully. The customer was very satisfied and prepared to ship it. The customer used three-phase voltage, Copeland compressor, Siemens PLC program controller, water cooling, and LS electrical components.  The cube ice machine is an efficient, energy-saving and hygienic ice-making equipment.
Customized 1 ton cube ice machine for Peruvian customers  Peruvian customer ordered a 1-ton cube ice machine from our company and we shipped it to the customer. The customer used 220V60HZ3P voltage, Copeland compressor, and water cooling. After sending the test video to the customer, the customer was very satisfied with our machine, and we will transport the machine to the port for the customer.  This 1-ton cube ice machine is a high-efficiency appliance designed to produce a steady supply of granular ice.
Robin Ice Machine Company has completed the production of three 5-ton flake ice machines for Samoan customers.Robin Ice Machine Company has completed the production of three 5-ton flake ice machines for Samoa customers. They use 380v, 50hz, bitzer compressors. The customer is very satisfied.  1. Convenience: Flake ice maker has a very convenient way to use, you just need to pour water into the ice maker and then control the switch to the desired temperature to start making ice chips.
Robin completed the production of three 5-ton flake ice machines for a Samoan companyThe following are three 5-ton flake ice machines made by Robin Ice Machine Company for Samoa customers. They use 380v and 50hz. They have been made and are ready for shipment.  1. Convenience: Flake ice maker has a very convenient way to use, you just need to pour water into the ice maker and then control the switch to the desired temperature to start making ice chips. In addition, the flake ice maker allows you to make cool ice flakes easily without having to worry about the waiting time.  2.